Omron FQ2-S/CH Series User Manual page 386

When the Command Is Not Processed Normally
E R CR
Delimiter
<Parameter Descriptions>
BKD data size
BKD data (binary)
PREIMAGESAVEB (Check) / IMAGESAVEB (Execute)
Outputting image (binary data)
This command outputs images stored in the Sensor memory in binary format.
To execute this command, two types of commands are used, a confirmation command and an execution
command.
For how to execute the command using the confirmation command and the execution command, refer to
Binary Data File Load and Save Commands: p. 188.
<Confirmation command format>
Before images saved to the Sensor's memory are output in binary data format, a check is performed to
determine if the data can be received by the external device that will receive the data.
P R E I
<Confirmation command response format>
When the Command Is Processed Normally
CR
Image data size
Delimiter
O K CR
Delimiter
When the Command Is Not Processed Normally
E R CR
Delimiter
<Execution command format>
Outputs image data stored in the Sensor memory in binary format.
I M A G
384
Command Control
Number of bytes of all setting data to output (integer type)
All setting data to output (binary data)
M A G E S A
E S A V E B CR
Delimiter
Image data number
V E B
Space
(0x20)
CR
Delimiter
FQ2-S/CH User's Manual
for Communications Settings