Omron FQ2-S/CH Series User Manual page 321

REGIMAGE or RID
Acquire Registered Image
This command loads a registered image saved to the SD card or PC Tool as the measurement image.
The registered image is the latest image or a logging image that has been assigned a number between 0 and
999 and has been registered in advance with the Set a Registered Image command.
Set a Registered Image p.289
<Command Format>
R E G I M A
Space
or
(0x20)
R I D
Registered image number
(3 digits max.)
<Response Format>
When the Command Is Processed Normally
O K CR
Delimiter
When the Command Is Not Processed Normally
E R CR
Delimiter
<Parameter Descriptions>
Registered image number Specifies the image to be loaded as the measurement image.
FQ2-S/CH User's Manual
for Communications Settings
Space
(0x20)
G E
Registered image number
(3 digits max.)
CR
Delimiter
The image is registered in advance with the Set a Registered Image command and
assigned a number. (0 to 999)
CR
Delimiter
319
Command Control