Omron FQ2-S/CH Series User Manual page 357

DICLOAD
This command loads model dictionary data that is stored on the SD card inserted in the Touch Finder as the
model dictionary with the specified number.
The source for model dictionary data is the following fixed directory on the SD card.
\Sensor name\DIC
<Command Format>
D I C L O A D
Space (0x20)
<Response Format>
When the Command Is Processed Normally
O K CR
Delimiter
When the Command Is Not Processed Normally
E R CR
Delimiter
<Parameter Descriptions>
Model dictionary data Specifies the model dictionary data number you want to load. (0 to 31)
number
Model dictionary data Specifies the model dictionary data file name you want to load. (64 characters max.)
file name The file name extension (.dic) can be omitted.
Important
Do not turn off power to the Sensor until there is a response.
FQ2-S/CH User's Manual
for Communications Settings
C
R
Model dictionary data file name
Space (0x20)
Model dictionary data number (2 digits max.)
355
Command Control