Omron FQ2-S/CH Series User Manual page 292

<Parameter Descriptions>
Registered image number Specifies the image to be loaded as the measurement image.
Registration source
Logging image number
RESET
Resets the Sensor
This command resets the Sensor.
<Command Format>
Command
R E S E
<Response Format>
When the Command Is Processed Normally
If process is completed normally, the Sensor is restarted. There is therefore no response.
When the Command Is Not Processed Normally
E R CR
Delimiter
TEACH
Perform Teaching
This command performs teaching for all of the registered items and image adjustment items.
<Command Format>
Command
T E A C
290
Command Control
The image is registered in advance with the Set a Registered Image command and
assigned a number. (0 to 999)
Specifies the image to be set as the registered image.
0: Latest measurement image
1: Sensor logging image
This argument is only specified when setting the Sensor's logging images as registered
images. (0 to 19)
If the registration source is 0: Latest measurement image, this argument is not required.
T CR
Delimiter
H CR
Delimiter
FQ2-S/CH User's Manual
for Communications Settings