Load Model Dictionary Number Data
This command loads model dictionary data that is stored on the SD card inserted in the Touch Finder as the
specified model dictionary number.
The source for calibration data is the following fixed directory on the SD card.
\Sensor name\DIC
Format
MRC
SRC
Sensor command code (4
(1 byte)
(1 byte)
bytes)
28
0F
0060C000
Response Format
MRC
SRC
MRES
(1 byte)
(1 byte)
(1 byte)
28
0F
End code
End Codes
End code (hex)
0000
Command execution ended normally.
FFFF
Command execution ended in an error.
Parameter Descriptions
Model dictionary number Specifies the model dictionary number you want to load. (0 to 31)
Model dictionary data file
Specifies the model dictionary data file name you want to load.
name
The file name extension (.dic) can be omitted.
Important
Do not turn off power to the Sensor until there is a response.
FQ2-S/CH User's Manual
for Communications Settings
Model dictio-
nary number
(4 bytes)
2 digits max.
SRES
Sensor command code (4 bytes)
(1 byte)
0060C000
Description
Model dictionary data file
name (4 to 64 bytes)
64 characters max.
437
Command Control