Omron FQ2-S/CH Series User Manual page 442


Save Scene Group Data
This command saves all scene data as a file to the SD card inserted in the Touch Finder.
The destination for all scene data is the following fixed directory on the SD card.
\Sensor name\SGP
Format
MRC SRC
(1 byte) (1 byte)
28 0F
Response Format
MRC SRC
(1 byte) (1 byte)
28 0F
End Codes
End code (hex)
0000
FFFF
Parameter Descriptions
All scene data file name Specifies the all scene data file name to save.
Important
• If the specified file name already exists, this existing file will be overwritten.
• Do not turn off power to the Sensor until there is a response.
440
Command Control
Sensor command code (4
bytes)
00702000
MRES SRES
(1 byte) (1 byte)
End code
Command execution ended normally.
Command execution ended in an error.
The file name extension (.sgp) can be omitted.
Save scene group number
(4 bytes)
2 digits max.
Sensor command code
(4 bytes)
00702000
Description
All scene data file
name (4 to 64 bytes)
64 characters max.
FQ2-S/CH User's Manual
for Communications Settings