Omron FQ2-S/CH Series User Manual page 360

SGRSAVE
This command saves all scene data as a file to the SD card inserted in the Touch Finder.
The destination for all scene data is the following fixed directory on the SD card.
\Sensor name\SGP
<Command format>
S G R S A V E
<Response format>
When Processing Is Performed Normally
When Processing Is Not Performed Normally
<Parameter Descriptions>
All scene data file name
Important
• If the specified file name already exists, this existing file will be overwritten.
• Do not turn off power to the Sensor until there is a response.
358
Command Control
C
R
All scene data file name
Space (0x20)
Specifies the all scene data file name to be saved. (64 characters max.)
The file name extension (.sgp) can be omitted.
FQ2-S/CH User's Manual
for Communications Settings