Omron FQ2-S/CH Series User Manual page 115

Command code in
command area (hex)
+2 +3
8030 0030 Batch Set D Terminal Status
F000 0030 Set Execution Mode
 Load Setting Data Commands
Command code in
command area (hex)
+2 +3
1000 0060 Load Scene Data
2000 0060 Load All Scene Data
3000 0060 Load System Data
5000 0060 Load All Setting Data
A000 0060 Load Calibration Data
B000 0060 Load All Calibration Data
C000 0060 Load Model Dictionary Data
D000 0060 Load All Model Dictionary Data Loads all model dictionary data that is stored
 Save Setting Data Commands
Command code in
command area (hex)
+2 +3
1000 0070 Save Scene Data
2000 0070 Save All Scene Data
3000 0070 Save System Data
4000 0070 Save Image Data
FQ2-S/CH User's Manual
for Communications Settings
Command name
Batch sets the ON/OFF status for the D termi-
nals (D0 to D15).
Sets the FQ2 execution status (execution
mode).
Command name
Loads scene data that is stored on the SD
card inserted in the Touch Finder.
Loads all scene data that is stored on the SD
card inserted in the Touch Finder.
Loads system data that is stored on the SD
card inserted in the Touch Finder.
Loads all setting data (all scene data, system
data, calibration group data) for the Sensor
saved as a backup file from the SD card
inserted in the Touch Finder.
Loads calibration data that is stored on the
SD card inserted in the Touch Finder as the
specified calibration number.
Loads all calibration data that is stored on the
SD card inserted in the Touch Finder.
Loads model dictionary data that is stored on
the SD card inserted in the Touch Finder as
the model dictionary with the specified num-
ber.
on the SD card inserted in the Touch Finder.
Command name
Saves scene data to the SD card inserted in
the Touch Finder as a file.
Saves all scene data as a file to the SD card
inserted in the Touch Finder.
Saves system data as a file to the SD card
inserted in the Touch Finder.
Saves image data saved in the Sensor's
memory by the logging function to the SD
card inserted in the Touch Finder as ifz data.
Controlling Operation and Outputting Data with EtherNet/IP Communications
Function
Function
Function
Reference
p.256
p.257
Reference
p.259
p.260
p.261
p.262
p.263
p.264
p.265
p.266
Reference
p.267
p.268
p.269
p.270
113