Omron FQ2-S/CH Series User Manual page 166

Command code in
command area (hex)
00207020
00208010
00208020
00208030
0020F000
 Commands to Write Data
Command code in
command area (hex)
00501010
00501020
00501040
00504010
00504060
00502000
00307010
00307020
00308010
00308020
00308030
0030F000
164
Outputting Data and Controlling Operation through PROFINET
Command name
Acquire Communication Out-
put Status
Acquire Terminal Status
Batch Acquire Terminal Status Batch acquires the ON/OFF status for the all
Batch Acquire IN Terminal Sta-
tus
Acquire Execution Mode
Command name
Set Image Adjustment Item
Data
Set Inspection Item Data
Set Camera Parameter
Set System Data
Terminal Offset Data
Set Date and Time
Set Communication Input Sta-
tus
Set Communication Output
Status
Set Terminal Status
Batch Set Terminal Status
Batch Set D Terminal Status
Set Execution Mode
Function
Acquires the output status (allowed/prohib-
ited) for the communications protocol set with
the Set Communication Output Status com-
mand.
Acquires the ON/OFF status of the input sig-
nal for the specified parallel I/O terminal.
parallel I/O input terminals other than the IN
terminals.
Batch acquires the ON/OFF status for the IN
terminals.
Acquires the FQ2 execution status (execution
mode).
Function
Sets parameters for a position compensation
item or filter item.
Sets parameters for the specified inspection
item.
Sets the value for the specified camera
parameter.
Sets the value to the specified system data.
This command sets the value of the terminal
offset data that is added to the IN0 to IN4
command parameters
Sets the current date and time information.
This command sets the input status (allowed/
prohibited) of the communications port for the
specified communications protocol.
This command sets the output status
(allowed/prohibited) of the communications
port for the specified communications proto-
col.
This command sets the output signal ON/
OFF status for the specified parallel I/O termi-
nal.
Batch sets the ON/OFF status for the all par-
allel I/O output terminals other than the D ter-
minals (D0 to D15).
Batch sets the ON/OFF status for the D termi-
nals (D0 to D15).
Sets the FQ2 execution status (execution
mode).
Reference
p.241
p.242
p.243
p.244
p.245
Reference
p.246
p.248
p.249
p.250
p.251
p.258
p.252
p.253
p.253
p.255
p.256
p.257
FQ2-S/CH User's Manual
for Communications Settings