Omron FQ2-S/CH Series User Manual page 433

Load Setting Data Commands

Load Scene Data
Loads scene data that is stored on the SD card inserted in the Touch Finder.
The source for scene data is the following fixed directory on the SD card.
\Sensor name\SCN
Format
MRC SRC Sensor command code (4
(1 byte) (1 byte) bytes)
28 0F 00601000
Response Format
MRC SRC MRES
(1 byte) (1 byte) (1 byte)
28 0F End code
End Codes
End code (hex)
0000 Command execution ended normally.
FFFF Command execution ended in an error.
Parameter Descriptions
Scene number Specifies the scene number (0 to 31) to be loaded
Scene data file name Specifies the scene data file name you want to load.
Only files with the extension "SCN" can be loaded.
Important
Do not turn off power to the Sensor until there is a response.
FQ2-S/CH User's Manual
for Communications Settings
Scene number (4 bytes)
2 digits max.
SRES Sensor command code
(1 byte) (4 bytes)
00601000
Description
Scene data file name
(4 to 64 bytes)
64 characters max.
Command Control
431