Omron FQ2-S/CH Series User Manual page 414


Set Communication Output Status
This command sets the output status (allowed/prohibited) for all the communications protocol.
Communications protocols with the output status set to prohibited will no longer output signals after being set
as such.
Command Format
MRC SRC
(1 byte) (1 byte)
28 0F
Response Format
MRC SRC
(1 byte) (1 byte)
28 0F
End Codes
End code (hex)
0000
FFFF
Parameter Descriptions
Communications proto-
col status to be set
412
Command Control
Sensor command code (4
bytes)
00307020
MRES SRES
(1 byte) (1 byte)
End code
Command execution ended normally.
Command execution ended in an error.
Specifies the communications protocol status to be set.
0: Output prohibited status
1: Output allowed status
Communications protocol status
to be set (4 bytes)
Communications protocol status
to be set (1 digit max.)
Sensor command code (4 bytes)
00307020
Description
FQ2-S/CH User's Manual
for Communications Settings