Omron FQ2-S/CH Series User Manual page 382

<Execution command response format>
When the Command Is Processed Normally
Scene data (binary)
O K CR
Delimiter
When the Command Is Not Processed Normally
E R CR
Delimiter
<Parameter Descriptions>
Scene data number
Scene data size
Scene data (binary)
PRESGRSAVEB (Check) / SGRSAVEB (Execute)
Outputting all scene data (binary data)
This command outputs all scene data for the Sensor in binary data format.
To execute this command, two types of commands are used, a confirmation command and an execution
command.
For how to execute the command using the confirmation command and the execution command, refer to
Binary Data File Load and Save Commands: p. 188.
<Confirmation command format>
Before all scene data in binary data format is output, a check is performed to determine if the data can be
received by the external device that will receive the data.
P R E S
<Confirmation command response format>
When the Command Is Processed Normally
All scene data size
O K CR
Delimiter
380
Command Control
CR
Delimiter
Specifies the scene number (integer type) you want to output.
Specify 0 to 31.
Number of bytes of scene data to output (integer type)
Scene data to output (binary data)
G R S A V E
CR
Delimiter
B CR
Delimiter
FQ2-S/CH User's Manual
for Communications Settings