Omron FQ2-S/CH Series User Manual page 327

DATE
Change the date and time information of build-in Sensor.
<Command Format>
<Response Format>
When the Command Is Processed Normally
When the Command Is Not Processed Normally
Note
<Hour: 2 digits>, <Minute: 2 digits>, and <Second: 2 digits> can be omitted during setting. Settings cannot be
updated when these are omitted, however, and the previous time will be kept unchanged.
Allowable omission patterns include "omitting <second> only", "omitting <minute> and <second>", and "omitting
<hour>, <minute>, and <second>". Patterns that cannot be used include "omitting <hour> only" and "omitting <min-
ute> only".
Example
When change the date and time to 8.30.2007.12:30:00
<Command>
<Response>
FQ2-S/CH User's Manual
for Communications Settings
325
Command Control