Omron FQ2-S/CH Series User Manual page 338

<Parameter Descriptions>
Image adjustment item
(filter item/position com-
pensation item) number
Region number
Figure number
Parameter 1 to parame-
ter 21
*1 The regions are specified with the following values according to the image adjustment item (filter item/position compensation item) type.
Image adjustment item
(filter item/position
compensation item)
type
Color Gray Filter
Weak Smoothing
Strong Smoothing
Dilate
Erosion
Median
Edge Extraction
Extract Horizontal Edges 0 (Filter region)
Extract Vertical Edges
Enhance Edges
Background Suppression
Shape Search III Posi-
tion Compensation
Shape Search Position
Compensation
336
Command Control
Specifies the image adjustment item (filter item/position compensation item) number.
(0 to 7)
Selects the regions. The value that specifies each region differs according to the image
adjustment item (filter item/position compensation item) type.
The measurement region or model registration region range registers a complicated
model or a measurement region by combining a maximum of 8 figures (rectangles, cir-
cles, and other shapes).
Of those figures, specify the figure to change the range of using this command with the
*1
figure number.
Use the Acquire Image Adjustment Item (Filter Item/Position Compensation Item) Figure
command to check the figure numbers assigned to each figure in advance.
Acquire Measurement Region/Model Region Information Set for an Image
Adjustment Item (Filter Item/Position Compensation Item): p. 305
The settings for the model registration region or the measurement region are split up and
set in parameter 1 through parameter 21.
Region number
0 (Filter region)
0 (Filter region)
0 (Filter region)
0 (Filter region)
0 (Filter region)
0 (Filter region)
0 (Filter region)
0 (Filter region)
0 (Filter region)
0 (Filter region)
1 (Background suppression calculation region)
0 (Position compensation region)
1 (model registration region)
2 (measurement region)
0 (Position compensation region)
1 (model registration region)
2 (measurement region)
*2
Command arguments
*1
Figure number
0
0
0
0
0
0
0
0
0
0
0
0
0
0 to 7
0
0
0 to 7
0
FQ2-S/CH User's Manual
for Communications Settings