Omron FQ2-S/CH Series User Manual page 365

CLBSAVE
This command saves the calibration data with the specified calibration number as a file to the SD card inserted
in the Touch Finder.
The destination for calibration data is the following fixed directory on the SD card.
\Sensor name\CLB
<Command Format>
C L B S A V E
Space (0x20)
<Response Format>
When the Command Is Processed Normally
O K CR
Delimiter
When the Command Is Not Processed Normally
E R CR
Delimiter
<Parameter Descriptions>
Scene number
Calibration data file name
Important
• If the specified file name already exists, this existing file will be overwritten.
• Do not turn off power to the Sensor until there is a response.
CGRSAVE
Saves all calibration data as a file to the SD card inserted in the Touch Finder.
The destination for all calibration data is the following fixed directory on the SD card.
\Sensor name\CGP
<Command Format>
C G R S A V E
FQ2-S/CH User's Manual
for Communications Settings
C
R
Calibration data file name
Space (0x20)
Scene number (2 digits max.)
Specifies the scene number (0 to 31) to be saved.
Specifies the file name when saving.
The file name extension (.clb) can be omitted.
C
R
All calibration data file name
Space (0x20)
363
Command Control