Omron FQ2-S/CH Series User Manual page 434


Load All Scene Data
Loads all scene data that is stored on the SD card inserted in the Touch Finder.
The source for all scene data is the following fixed directory on the SD card.
\Sensor name\SGP
Format
MRC SRC
(1 byte) (1 byte)
28 0F
Response Format
MRC SRC
(1 byte) (1 byte)
28 0F
End Codes
End code (hex)
0000
FFFF
Parameter Descriptions
Scene group data file
name
(all scene data file name)
Important
Do not turn off power to the Sensor until there is a response.
432
Command Control
Sensor command code (4
bytes)
00602000
MRES SRES
(1 byte) (1 byte)
End code
Command execution ended normally.
Command execution ended in an error.
Specifies the all scene data file name to be loaded.
The file name extension (.sgp) can be omitted.
Specifies the scene group number (0 to 31) to be loaded.
Scene group number (4 bytes)
2 digits max.
Sensor command code (4 bytes)
00602000
Description
Scene group data file
name (4 to 64 bytes)
64 characters max.
FQ2-S/CH User's Manual
for Communications Settings