Omron FQ2-S/CH Series User Manual page 372

<Parameter Descriptions>
File size scheduled to be sent
Scene data number
Scene data (binary)
PRESGRLOADB (Check) / SGRLOADB (Execute)
Loading all scene data (binary data)
The Sensor loads all scene data in binary format.
To execute this command, two types of commands are used, a confirmation command and an execution
command.
For how to execute the command using the confirmation command and the execution command, refer to
Binary Data File Load and Save Commands: p. 188.
<Confirmation command format>
Before loading all scene data in binary data format, the Sensor checks whether or not it can receive binary
data.
P R E S
<Confirmation command response format>
When the Command Is Processed Normally
O K CR
Delimiter
When the Command Is Not Processed Normally
E R CR
Delimiter
370
Command Control
Number of bytes of scene data scheduled to send (integer type)
Specifies the scene number you want to load. (Integer type)
Specify 0 to 31.
Scene data to be loaded (binary data)
G R L O A D
File size scheduled to be sent
B
Space Delimiter
(0x20)
CR
FQ2-S/CH User's Manual
for Communications Settings