Omron FQ2-S/CH Series User Manual page 319

<Parameter Descriptions>
Terminal type
Terminal number
Acquired value
FQ2-S/CH User's Manual
for Communications Settings
Specifies the type of terminal for the terminal status to be acquired.
• Sensor's standard parallel communications
0: TRIG
2: IN0 to IN5
• Parallel Interface Sensor Data Unit
0: TRIG
1: DSA
2: IN0 to IN7
13: RESET
• RS-232C Interface Sensor Data Unit
0: TRIG
2: IN0 to IN5
13: RESET
Specifies the terminal number for the terminal status to be acquired.
• If the terminal type is IN0 to IN5
0: IN0 to 5: IN5
• If the terminal type is IN0 to IN7
0: IN0 to 7: IN7
• Cases other than the above cases
Specify 0
Returns the acquired terminal status. (ON: 1, OFF: 0)
317
Command Control