Omron FQ2-S/CH Series User Manual page 265

Load Calibration Data
This command loads calibration data that is stored on the SD card inserted in the Touch Finder as the specified
calibration number.
The source for calibration data is the following fixed directory on the SD card.
\Sensor name\CLB
The file name is not case sensitive. The file name extension can be omitted.
Command (PLC to Sensor)
First word of com-
mand area
12 to 15
+2 1010
+3 0000
+4 0000
+5 0000
+6 0000
+7 0000
+8 0000
: :
+37 0000
*1 Loads the files named Calibration_***.clb saved on the SD card. (***: Specified file number)
Response (Sensor to PLC)
First word of
response area
12 to 15
+2 1010
+3 0000
+4 0000
+5 0000
FQ2-S/CH User's Manual
for Communications Settings
Bits
8 to 11 4 to 7 0 to 3
0000 0000 0000
0000 0110 0000
0000 0000 0000
0000 0000 0000
0000 0000 0000
0000 0000 0000
0000 0000 0000
: : :
0000 0000 0000
Bits
8 to 11 4 to 7 0 to 3
0000 0000 0000
0000 0110 0000
0000 0000 0000
0000 0000 0000
Description
Command code
Calibration data number you want to load (0 to
31)
• EtherNet/IP, PROF- • PLC link
INET File name to load
File number to load (0 64 characters max.
*1
to 999) The file name exten-
sion (.clb) can be omit-
ted.
---
Specifying Character
Strings: p. 206
Description
Command code
The command code for which the response
applies is stored.
Response code
Command execution result
0: OK, FFFFFFFF: NG
Refer to
263
Command Control