Omron FQ2-S/CH Series User Manual page 310

GETDICFIGPARAM or GDFP
Acquire Dictionary Data Cutout Region Parameters
This command acquires the specified dictionary data cutout region parameters.
<Command Format>
G E T D I
or
Space
(0x20)
G D F P
Dictionary data number
Command
Region number (fixed value of 0)
<Response Format>
When the Command Is Processed Normally
Parameter 1 ,
Comma (fixed separator character)
Comma (fixed separator character)
O K CR
Delimiter
When the Command Is Not Processed Normally
E R CR
Delimiter
<Parameter Descriptions>
Dictionary data number
Region number
Figure number
Parameter 1 to parame-
ter 5
* The dictionary data cutout region figure parameters are the upper-left coordinates and the lower-right coordinates of the rectangle.
308
Command Control
Command
C F I G P A
Space Figure number
(0x20) (fixed value of 0)
Space
(2 digits max.)
(0x20)
Parameter 2 , ... Parameter 5
Specifies the dictionary data number. (0 to 31)
With the FQ2, specify 0.
With the FQ2, specify 0.
The items of information for the dictionary data cutout region are split up and returned in
parameter 1 through parameter 5.
Dictionary data number
(2 digits max.)
R A M
Space Space
(0x20) (0x20)
CR
Delimiter
CR
*
Space
(0x20)
CR
Delimiter
Figure number
(fixed value of 0)
Region number
(fixed value of 0)
FQ2-S/CH User's Manual
for Communications Settings