Omron FQ2-S/CH Series User Manual page 286

ITEMTEACH or IT
Perform Teaching (Inspection Item)
This command updates the reference data for the specified inspection item.
The model data is also updated for inspection items that have model data.
<Command Format>
I T E M
<Response Format>
When the Command Is Processed Normally
O K CR
Delimiter
When the Command Is Not Processed Normally
E R CR
Delimiter
<Parameter Descriptions>
Inspection item number
284
Command Control
T E A C H
Space
(0x20)
Specifies the item number of the inspection item that teaching will be performed on. (0 to
31)
Only "0" can be specified with the FQ2-S1 series.
Delimiter
or
CR I
Inspection item number
(2 digits max.)
Delimiter
T CR
Space Inspection item number
(0x20) (2 digits max.)
FQ2-S/CH User's Manual
for Communications Settings