Omron FQ2-S/CH Series User Manual page 162

Signal
GATE
Command code
Response code
Response data
Important
If measurements are executed in parallel, the PROFINET BUSY signal will also turn ON.
• Input Area (Output Area)
The Input Area (output area) is assigned immediately after the Input Area (response area) in I/O memory.
Input Area
(Output Area)
7
+16
+17
+18
+19
·
·
·
+44
+45
+46
+47
·
·
·
+76
+77
+78
+79
·
·
·
160
Outputting Data and Controlling Operation through PROFINET
Signal name
Data Output Com- This signal turns ON when the Sensor finishes outputting
pleted data.
If [Output handshake] is set to [Yes], this signal automati-
cally turns OFF when the Data Output Request Bit (DSA)
signal from the external device turns OFF. If [Output hand-
shake] is set to [No], this signal turns OFF after the data
output period has elapsed.
Command code This I/O port returns the command code that was exe-
cuted.
Response code This I/O port contains the response code of the executed
command.
Response data This I/O port contains the response data of the executed
command.
Bits
6 5 4
Output data 1
·
·
·
Output data 8
·
·
·
Output data 16
·
·
·
Function
3 2 1 0
Application
method
Data output
after measure-
ments
Command/
response com-
munications
Description
Output data 0 (32 bits)
·
·
·
Output data 7 (32 bits)
·
·
·
Output data 15 (32 bits)
·
·
·
FQ2-S/CH User's Manual
for Communications Settings