Omron FQ2-S/CH Series User Manual page 186

Type of command
Commands to get status
Commands to set status
Commands to read data
184
Control and Output in No-Protocol (TCP) / No-Protocol (UDP)
Command Abbreviation
SCENE S
SCENE S
CAMDATA CD
DICNOLIST DNL
DIOFFSET DIO
DIPORTCOND DPC
ERRGET None
GETITEMFIG-
PARAM GIFP
GETPOSFIG- GPFP
PARAM
GETDICFIG- GDFP
PARAM
INPUTTRANS- ITS
STATE
ITEMDATA ID
ITEMDATA2 ID2
MODE None
OUTPUT-
TRANSSTATE OTS
PARAALLCOND PAC
Function
Acquires the scene number currently
being used.
Changes the scene number to be
used.
Acquires the value of the specified
camera parameter.
Acquires the list of registered dictio-
nary data numbers.
Acquires the terminal offset data that
is added to the IN0 to IN4 command
parameters when executing parallel
commands.
Batch acquires the ON/OFF status for
the IN terminals.
Acquires the Sensor's most recent
error code.
Acquires the parameters for the mea-
surement region or model registration
region set for an inspection item.
Acquires the parameters for the mea-
surement region or the model regis-
tration region set for an image
adjustment item (filter item/position
compensation item).
Acquires the specified dictionary data
cutout region parameters.
Acquires the input status (allowed/
prohibited) for the communications
protocol set with the Set Communica-
tion Input Status command.
Acquires parameters and measure-
ment values for the specified inspec-
tion item.
Acquires the text string data of the
specified inspection item.
Acquires the FQ2 execution status
(execution mode).
Acquires the output status (allowed/
prohibited) for the communications
protocol set with the Set Communica-
tion Output Status command.
Batch acquires the ON/OFF status for
the all parallel I/O input terminals
other than the IN terminals.
for Communications Settings
Reference
p.294
p.295
p.296
p.298
p.299
p.300
p.301
p.302
p.305
p.308
p.310
p.311
p.312
p.313
p.314
p.315
FQ2-S/CH User's Manual