Omron FQ2-S/CH Series User Manual page 320

POSITIONDATA or PD
Get Image Adjustment Data
This command acquires parameters from a position compensation item or filter item.
<Command Format>
P O S I
or
P D
Command
Space
(0x20)
<Response Format>
When the Command Is Processed Normally
Acquired
CR
value
O K CR
Delimiter
When the Command Is Not Processed Normally
E R CR
Delimiter
<Parameter Descriptions>
Item number
External reference data
number
Acquired value
318
Command Control
Command
T I O N D A
CR
External reference data
(4 digits max.)
Space
(0x20)
Item
number
Specifies the item number of the position compensation item or of the filter item.
Specifies the external reference data number.
Section 9-2 External Reference Parameters
in Sensor FQ2-S/CH Series User's Manual (Cat. No. Z337)
Returns the image adjustment data or threshold value.
Section 9-2 External Reference Parameters
in Sensor FQ2-S/CH Series User's Manual (Cat. No. Z337)
External reference data (4 digits max.)
T A
Space
(0x20)
Item
number
Delimiter
CR
Space Delimiter
(0x20)
FQ2-S/CH User's Manual
for Communications Settings