Omron FQ2-S/CH Series User Manual page 359

Save Configuration Data Commands
SCNSAVE
This command saves scene data to the SD card inserted in the Touch Finder as a file.
The destination for scene data is the following fixed directory on the SD card.
\Sensor name\SCN
<Command format>
S C N S A V E
Space (0x20)
<Response format>
When Processing Is Performed Normally
When Processing Is Not Performed Normally
<Parameter Descriptions>
Scene No.
Scene data file name
Important
• If the specified file name already exists, this existing file will be overwritten.
• Do not turn off power to the Sensor until there is a response.
FQ2-S/CH User's Manual
for Communications Settings
C
R
Scene data file name
Space (0x20)
Scene No. (2 digits max.)
Specifies the scene No. to save (0 to 31).
Specifies the file name when saving.
The file name extension (.scn) can be omitted.
357
Command Control