Omron FQ2-S/CH Series User Manual page 214

Function
Loads model dictionary data that is stored on the SD
card inserted in the Touch Finder as the model dictio-
nary with the specified number.
Loads all model dictionary data that is stored on the SD
card inserted in the Touch Finder.
Loads scene data in binary data format.
Loads all scene data in binary data format.
Loads system data in binary data format.
Loads all setting data for the Sensor in binary data for-
mat.
Loads calibration data in binary data format.
Loads all calibration data in binary data format.
Loads model dictionary data in binary data format.
Loads all model dictionary data in binary data format.
*: Commands that are used for the no protocol (TCP) communications only. For No-protocol (UDP), No-protocol (RS-232C) and EtherNet/IP
(Message), commands are not issued.
212
Command Control
OK: Applicable command, RST: Command with restricted execution, NA: Non-applicable command
Parallel
p. 46, p. 75
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
PLC link EtherNet/ PROFINET
p. 139 IP p. 165
(Tag Data
Links)
p. 113
OK OK OK
OK OK OK
NA NA NA
NA NA NA
NA NA NA
NA NA NA
NA NA NA
NA NA NA
NA NA NA
NA NA NA
No-protocol No-proto-
(TCP/UDP/ col (FINS)
RS-232C) p. 198
p. 186,
p. 190
OK OK
OK OK
RST NA
RST NA
RST NA
RST NA
RST NA
RST NA
RST NA
RST NA
FQ2-S/CH User's Manual
for Communications Settings