Omron FQ2-S/CH Series User Manual page 389

<Confirmation command response format>
When the Command Is Processed Normally
Calibration data size
O K CR
Delimiter
When the Command Is Not Processed Normally
E R CR
Delimiter
<Execution command format>
This command outputs the calibration data in binary data format.
C L B S A V
<Execution command response format>
When the Command Is Processed Normally
Calibration data (binary)
O K CR
Delimiter
When the Command Is Not Processed Normally
E R CR
Delimiter
<Parameter Descriptions>
Calibration data number
Calibration data size
Calibration data (binary)
FQ2-S/CH User's Manual
for Communications Settings
CR
Delimiter
E B CR
Delimiter
CR
Delimiter
Specifies the calibration number (integer type) you want to output.
Specify 0 to 31.
Number of bytes of calibration data to output (integer type)
Calibration data to output (binary data)
387
Command Control