Omron FQ2-S/CH Series User Manual page 381

Save Commands for Binary Data Files
PRESCNSAVEB (Check) / SCNSAVEB (Execute)
Outputting scene data (binary data)
This command outputs scene data for the Sensor in binary data format.
To execute this command, two types of commands are used, a confirmation command and an execution
command.
For how to execute the command using the confirmation command and the execution command, refer to
Binary Data File Load and Save Commands: p. 188.
<Confirmation command format>
Before scene data in binary data format is output, a check is performed to determine if the data can be received
by the external device that will receive the data.
P R E S C N
<Confirmation command response format>
When the Command Is Processed Normally
CR
Scene data size
Delimiter
O K CR
Delimiter
When the Command Is Not Processed Normally
E R CR
Delimiter
<Execution command format>
This command outputs the scene data in binary data format.
S C N S A V
FQ2-S/CH User's Manual
for Communications Settings
S A V E B
Space
(0x20)
E B CR
Delimiter
Scene data number
CR
Delimiter
379
Command Control