Omron FQ2-S/CH Series User Manual page 420


Get Image Adjustment Data
This command acquires parameters or measurement values from a position compensation item or filter item.
Format
MRC SRC
(1 byte) (1 byte)
28 0F
Response Format
MRC SRC
(1 byte) (1 byte)
28 0F
End Codes
End code (hex)
0000
FFFF
Parameter Descriptions
Position compensation
item number
External reference num-
ber
Acquired value
418
Command Control
Sensor command code (4
bytes)
00401010
MRES SRES
(1 byte) (1 byte)
End code
Command execution ended normally.
Command execution ended in an error.
Specifies the number of the position compensation item or filter item for which to acquire the data. (0 to 7)
Specifies the external reference number.
Section 9-2 External Reference Parameters
in Sensor FQ2-S/CH Series User's Manual (Cat. No. Z337)
Returns the image adjustment data or threshold value.
Section 9-2 External Reference Parameters
in Sensor FQ2-S/CH Series User's Manual (Cat. No. Z337)
Position compensation item/filter
item number (4 bytes)
Position compensation item/filter
item number 0 to 7 (1 digit max.)
Sensor command code
(4 bytes)
00401010
Description
External reference
number (4 bytes)
External reference
number
Acquired value
(4 bytes)
Acquired value
(1,000 times the
actual value)
FQ2-S/CH User's Manual
for Communications Settings