Omron FQ2-S/CH Series User Manual page 274

Save All Setting Data
This command saves all setting data (all scene data, system data, calibration group data) for the Sensor to the
SD card inserted in the Touch Finder as a backup file.
\Sensor name\BKD
The file name is not case sensitive. The file name extension can be omitted.
Command (PLC to Sensor)
First word of com-
mand area
+2
+3
+4
+5
+6
:
+37
*1 Saved as a file named SensorAll_***.bkd. (***: Specified file number)
Response (Sensor to PLC)
First word of
response area
+2
+3
+4
+5
272
Command Control
Bits
12 to 15 8 to 11 4 to 7
0101 0000 0000
0000 0000 0111
0000 0000 0000
0000 0000 0000
0000 0000 0000
: :
0000 0000 0000
Bits
12 to 15 8 to 11 4 to 7
0101 0000 0000
0000 0000 0111
0000 0000 0000
0000 0000 0000
0 to 3
0000
Command code
0000
0000 • EtherNet/IP,
PROFINET
0000
File number to save
(0 to 999)*1
0000
: :
0000
0 to 3
0000 Command code
Response target command codes
0000
0000 Response code
Command execution result
0000
0: OK, FFFFFFFF: NG
Contents
• PLC link
File name to save
64 characters max.
The file name exten-
sion (.bkd) can be
omitted.
Refer to
---
Specifying Character
Strings: p. 206
Contents
FQ2-S/CH User's Manual
for Communications Settings