Omron FQ2-S/CH Series User Manual page 379

<Confirmation command response format>
When the Command Is Processed Normally
O K CR
Delimiter
When the Command Is Not Processed Normally
E R CR
Delimiter
<Execution command format>
Loads model dictionary data in binary data format.
D I C L O A
<Execution command response format>
When the Command Is Processed Normally
O K CR
Delimiter
When the Command Is Not Processed Normally
E R CR
Delimiter
<Parameter Descriptions>
File size scheduled to be sent
Model dictionary data number
Model dictionary data (binary)
PREDGRLOADB (Check) / DGRLOADB (Execute)
Loading all model dictionary data (binary data)
The Sensor loads all model dictionary data in binary data format.
To execute this command, two types of commands are used, a confirmation command and an execution
command.
For how to execute the command using the confirmation command and the execution command, refer to
Binary Data File Load and Save Commands: p. 188.
FQ2-S/CH User's Manual
for Communications Settings
Model dictionary number
D B
Space
(0x20)
Number of bytes of model dictionary data scheduled to send (integer type)
Specifies the model dictionary number you want to load. (Integer type)
Specify 0 to 31.
Model dictionary data to be loaded (binary data)
Delimiter
CR
Space Model dictionary data
(0x20) (binary)
377
Command Control