Omron FQ2-S/CH Series User Manual page 219

Smart camera

Hide thumbs Also See for FQ2-S/CH Series:

Table of Contents

Clear Data Output Buffer

This command clears all data from the data output buffer of the Sensor. If an error occurs in the PLC after

measurement, data will remain in the data output buffer of the Sensor. This command clears the data. The

command prevents deviation of the data after an error occurs. This command only clears the data output buffer

of the Sensor; it does not clear the output area of the PLC.

Command (PLC to Sensor)

First word of com-

Response (Sensor to PLC)

First word of

response area

FQ2-S/CH User's Manual

for Communications Settings

Command code

Command code

The command code for which the response

applies is stored.

Response code

Command execution result

0: OK, FFFFFFFF: NG

Command Control

Chapters

Table of Contents