Omron FQ2-S/CH Series User Manual page 176

Initial Settings for No-protocol Communications
You must set the communications method of the destination external device to perform no-protocol
communications.
[Sensor settings] − [Data output] − [No-protocol data]
1
Press [No protocol (TCP)] or [No protocol (UDP)].
2
If you selected [No protocol (TCP)], select [TCP serv-
er] or [TCP client] for [Connection mode] and then
press [Back].
3
If you selected [No protocol (UDP)] or set [Connec-
tion mode] to [TCP client] in step 2, set the parame-
ters below.
Initial settings for no protocol communications
Items to set and their default values depend on the communication protocol used and connection mode set.
Communication proto-
col used and connec-
tion mode set
No protocol (TCP)
TCP server
No protocol (TCP)
TCP client
No protocol (UDP)
174
Control and Output in No-Protocol (TCP) / No-Protocol (UDP)
Item
Sets the input port number to wait for a
connection request from the connected
external device (or client) such as a PLC.
Input port
In this connection mode, an FQ2 Sensor
No.
serves as a TCP server and monitors this
port number to be ready for the connection
request from the client.
Output IP
Sets the IP address of the connected exter-
address
nal device (PLC, etc.).
Output port Sets the port number to be used for
No. exchanging data with the connected exter-
nal device (or client) such as a PLC.
Set the same port number as the port num-
ber set for the connected external device.
Input port Sets the port number used for data inputs.
No. Set the same port number as the port num-
ber set for the connected external device.
Output IP
Sets the IP address of the connected exter-
address
nal device (PLC, etc.).
Output port Sets the port number used for data outputs.
No. Set the same port number as the port num-
ber set for the connected external device.
Description Setting range
0 to 65,535
Default: 9,876
a.b.c.d
a: 1 to 223
b: 0 to 255
c: 0 to 255
d: 1 to 254
Default: 10.5.5.111
0 to 65,535
Default: 9,600
0 to 65,535
Default: 9,600
a.b.c.d
a: 1 to 223
b: 0 to 255
c: 0 to 255
d: 1 to 254
Default: 10.5.5.111
0 to 65,535
Default: 9,600
FQ2-S/CH User's Manual
for Communications Settings