Omron FQ2-S/CH Series User Manual page 403


Acquire Registered Image
This command loads a registered image saved to the SD card or PC Tool as the measurement image.
The registered image is the latest image or a logging image that has been assigned a number between 0 and
999 and has been registered in advance with the Set a Registered Image command.
Set a Registered Image p.401
Command Format
MRC SRC Sensor command code (4
(1 byte) (1 byte) bytes)
28 0F 00108020
Response Format
MRC SRC MRES
(1 byte) (1 byte) (1 byte)
28 0F End code
End Codes
End code (hex)
0000 Command execution ended normally.
FFFF Command execution ended in an error.
Parameter Descriptions
Registered image num- Specifies the image to be loaded as the measurement image.
ber The image is registered in advance with the Set a Registered Image command and assigned a number.
(0 to 999)
FQ2-S/CH User's Manual
for Communications Settings
Registered image number
(4 bytes)
3 digits max.
SRES Sensor command code (4 bytes)
(1 byte)
00108020
Description
401
Command Control