Omron FQ2-S/CH Series User Manual page 193

Type of command
PRESCNSAVEB
PRESGRSAVEB
Save commands for
binary data files
PRESYSSAVEB
PREBKDSAVEB
FQ2-S/CH User's Manual
for Communications Settings
Command Abbreviation
None
SCNSAVEB None
None
SGRSAVEB None
None
SYSSAVEB None
None
BKDSAVEB None
Control and Output in No-Protocol (TCP) / No-Protocol (UDP)
Function
Before scene data in binary data format is
output, a check is performed to determine if
the data can be received by the external
device that will receive the data.
This command outputs the scene data in
binary data format.
Before all scene data in binary data format is
output, a check is performed to determine if
the data can be received by the external
device that will receive the data.
This command outputs all scene data in
binary data format.
Before system data in binary data format is
output, a check is performed to determine if
the data can be received by the external
device that will receive the data.
This command outputs system data in binary
data format.
Before all setting data being used by the cur-
rent Sensor is output in binary data format, a
check is performed to determine if the data
can be received by the external device that
will receive the data.
This command outputs all setting data being
used by the current Sensor in binary data for-
mat.
Reference
p.379
p.379
p.380
p.380
p.381
p.381
p.383
p.383
191