GETPOSFIGPARAM or GPFP
Acquire Measurement Region/Model Region Information Set for an Image Adjustment Item (Filter Item/Position
Compensation Item)
This command acquires the parameters for the measurement region or the model registration region set for an
image adjustment item (filter item/position compensation item).
Note
To check the figure number to be used when specifying a figure to change the settings of with the Set Image Adjust-
ment Item Figure command, do so using this command.
<Command Format>
Command
G E
T
P
O
S
or
Space
Space
(0x20)
(0x20)
G
P
F
P
Command
Image adjustment item (filter item/position compensation item) number (1 digit)
<Response Format>
When the Command Is Processed Normally
Parameter 1
,
Parameter 2
Comma (fixed separator character)
Comma (fixed separator character)
O
K
CR
Delimiter
When the Command Is Not Processed Normally
E
R
CR
Delimiter
FQ2-S/CH User's Manual
for Communications Settings
F
I
G P A
R A M
Figure number
(1 digit)
CR
Delimiter
Space
(0x20)
Region number (1 digit)
,
...
Parameter 21
Image adjustment item
(filter item/position compensation item) number (1 digit)
Space
(0x20)
Space
Region
Figure
(0x20)
number
number
(1 digit)
(1 digit)
Space
(0x20)
CR
Delimiter
CR
Command Control
305