Omron FQ2-S/CH Series User Manual page 225

Set Registered Image
Sets the latest image or a specified logging image as a registered image.
Registered images are saved to the following directory on the SD card or PC Tool.
\Sensor name\REGIMAGE
The file name is not case sensitive. The file name extension can be omitted.
The image specified as a registered image can be loaded as a measurement image with the Acquire
Registered Image command.
Acquire Registered Image: p.224
A maximum of 1000 registered images (image registration number: 0 to 999) can be set.
* For the PC Tool, the data is saved in the "\..\My Documents\OMRON FQ\" folder.
Command (PLC to Sensor)
First word of com-
mand area
12 to 15
+2 1000
+3 0000
+4 0000
+5 0000
+6 0000
+7 0000
+8 0000
+9 0000
* Only when setting the Sensor's logging images as registered images
Response (Sensor to PLC)
First word of
response area
12 to 15
+2 1000
+3 0000
+4 0000
+5 0000
FQ2-S/CH User's Manual
for Communications Settings
*
Bits
8 to 11 4 to 7
0000 0001
0000 0001
0000 0000
0000 0000
0000 0000
0000 0000
0000 0000
0000 0000
Bits
8 to 11 4 to 7
0000 0001
0000 0001
0000 0000
0000 0000
Description
0 to 3
0000
Command code
0000
0000
Registered image number (0 to 999)
0000
0000 Specifying the image to set as a registered
image
0000
0: Latest measurement image
1: Sensor logging image
0000
Logging image number (0 to 19)
0000
Description
0 to 3
0000 Command code
The command code for which the response
0000
applies is stored.
0000 Response code
Command execution result
0000
0: OK, FFFFFFFF: NG
*
223
Command Control