Omron FQ2-S/CH Series User Manual page 430


Set Camera Parameter
Sets the value for the specified camera parameter.
Camera parameter numbers: p. 229
Command Format
MRC SRC
(1 byte) (1 byte)
28 0F
Response Format
MRC SRC
(1 byte) (1 byte)
28 0F
End Codes
End code (hex)
0000
FFFF
Parameter Descriptions
Camera parameter num-
*
ber
Setting value
428
Command Control
Sensor command code (4
bytes)
00501040
MRES SRES
(1 byte) (1 byte)
End code
Command execution ended normally.
Command execution ended in an error.
Specifies the number that corresponds to the camera parameter to be set.
Specifies the setting value to be set to the camera parameter.
Camera parameter number
(4 bytes)
3 digits max.
Sensor command code (4 bytes)
00501040
Description
Setting value
(4 bytes)
Dependent on the
camera parameter
(1,000 times the
actual value)
FQ2-S/CH User's Manual
for Communications Settings