Omron FQ2-S/CH Series User Manual page 340

SETDICFIGPARAM or SDFP
Set Dictionary Data Cutout Region Parameters
This command sets the specified dictionary data cutout region parameters.
<Command Format>
S E T D I
or
Space
(0x20)
S D F P
Command Dictionary data
(2 digits max.)
<Response Format>
When the Command Is Processed Normally
O K CR
Delimiter
When the Command Is Not Processed Normally
E R CR
Delimiter
<Parameter Descriptions>
Dictionary data number
Region number
Figure number
Parameter 1 to parame-
ter 4
* The dictionary data cutout region figure parameters are the upper-left coordinates and the lower-right coordinates of the rectangle.
Parameter 1
Parameter 2
Parameter 3
Parameter 4
338
Command Control
Command
C F I G P A R A
Space Figure number Space
(fixed value of 0) (0x20)
(0x20)
Space Parameter 1
number (0x20)
Parameter 2
Region number
(fixed value of 0)
Specifies the dictionary data number. (0 to 31)
With the FQ2, specify 0.
With the FQ2, specify 0.
The settings for the dictionary data cutout region are split up and set in parameter 1
*
through parameter 4.
Rectangle upper-left X coordinate
Rectangle upper-left Y coordinate
Rectangle lower-right X coordinate
Rectangle lower-right Y coordinate
Dictionary data number Space
(2 digits max.) (0x20)
M
Space Space Figure number
(0x20) (0x20) (fixed value of 0)
Region number
(fixed value of 0)
... CR
Delimiter
Space
(0x20)
Parameter 4
Name
Parameter 1 Parameter 4
CR
...
Space Space Delimiter
(0x20) (0x20)
Parameter 2
Data type
Integer type
FQ2-S/CH User's Manual
for Communications Settings