Omron FQ2-S/CH Series User Manual page 140

First word of com-
mand area (hex)
+2 +3
7020 0020
8010 0020
8020 0020
8030 0020
F000 0020
 Commands to Write Data
First word of com-
mand area (hex)
+2 +3
1010 0050
1020 0050
1040 0050
2000 0050
4010 0050
4060 0050
7010 0030
7020 0030
8010 0030
8020 0030
8030 0030
F000 0030
138
Controlling Operation and Outputting Data with PLC Link Communications
Command name
Acquire Communication Out-
put Status
Acquire Terminal Status
Batch Acquire Terminal Status Batch acquires the ON/OFF status for the all
Batch Acquire IN Terminal Sta-
tus
Acquire Execution Mode
Command name
Set Image Adjustment Item
Data
Set Inspection Item Data
Set Camera Parameter
Set Date and Time
Set System Data
Set Terminal Offset Data
Set Communication Input Sta-
tus
Set Communication Output
Status
Set Terminal Status
Batch Set Terminal Status
Batch Set D Terminal Status
Set Execution Mode
Function
Acquires the output status (allowed/prohib-
ited) for the communications protocol set with
the Set Communication Output Status com-
mand.
Acquires the ON/OFF status of the input sig-
nal for the specified parallel I/O terminal.
parallel I/O input terminals other than the IN
terminals.
Batch acquires the ON/OFF status for the IN
terminals.
Acquires the FQ2 execution status (execution
mode).
Function
Sets parameters for a position compensation
item or filter item.
This command sets the parameters of the
specified inspection item data.
Sets the value for the specified camera
parameter.
Sets the current date and time information.
Sets the value to the specified system data.
Sets the value of the terminal offset data that
is added to the IN0 to IN4 command parame-
ters
Sets the input status (allowed/prohibited) of
the communications port for the specified
communications protocol.
Sets the output status (allowed/prohibited) of
the communications port for the specified
communications protocol.
Sets the output signal ON/OFF status for the
specified parallel I/O terminal.
Batch sets the ON/OFF status for the all par-
allel I/O output terminals other than the D ter-
minals (D0 to D15).
Batch sets the ON/OFF status for the D termi-
nals (D0 to D15).
Sets the FQ2 execution status (execution
mode).
Reference
p.241
p.242
p.243
p.244
p.245
Reference
p.246
p.248
p.249
p.258
p.250
p.251
p.252
p.253
p.253
p.255
p.256
p.257
FQ2-S/CH User's Manual
for Communications Settings