Omron FQ2-S/CH Series User Manual page 212

Function
Acquires the specified dictionary data cutout region
parameters.
Acquires the Sensor's software version.
Acquires the version information of the Sensor hard-
ware.
Acquires the value set for the specified system data.
Acquires the terminal offset data that is added to the
IN0 to IN4 command parameters when executing paral-
lel commands.
Acquires the statistical data (such as the number of
measurements, number of NG overall judgments, and
other information, since the power supply was turned
ON) held by the Sensor.
Acquires the Sensor's most recent error code.
Acquires the input status (allowed/prohibited) for the
communications protocol set with the Set Communica-
tion Input Status command.
Acquires the output status (allowed/prohibited) for the
communications protocol set with the Set Communica-
tion Output Status command.
Acquires the ON/OFF status of the input signal for the
specified parallel I/O terminal.
Batch acquires the ON/OFF status for the all parallel I/O
input terminals other than the IN terminals.
Batch acquires the ON/OFF status for the IN terminals.
Acquires the FQ2 execution status (execution mode).
Acquires the current date and time information.
Commands to Write Data
Function
Registers characters to the specified dictionary data.
Deletes one character from the characters registered in
the model dictionary.
Sets measurement values for a position compensation
item or filter item.
Sets measurement values for the specified inspection
item.
Sets the text string data for the specified inspection
item.
Sets the value for the specified camera parameter.
210
Command Control
OK: Applicable command, RST: Command with restricted execution, NA: Non-applicable command
Parallel
p. 46, p. 75
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
OK: Applicable command, RST: Command with restricted execution, NA: Non-applicable command
Parallel
p. 46, p. 75
NA
NA
NA
NA
NA
NA
PLC link EtherNet/ PROFINET
p. 137 IP p. 163
(Tag Data
Links)
p. 111
NA NA NA
OK OK OK
NA NA NA
OK OK OK
OK OK OK
OK OK OK
OK OK OK
OK OK OK
OK OK OK
OK OK OK
OK OK OK
OK OK OK
OK OK OK
OK OK OK
PLC link EtherNet/ PROFINET
p. 138 IP p. 164
(Tag Data
Links)
p. 112
NA NA NA
NA NA NA
OK OK OK
OK OK OK
NA NA NA
OK OK OK
No-proto- No-proto-
col (TCP/ col (FINS)
UDP/RS- p. 198
232C)
p. 184
OK NA
OK OK
OK NA
OK OK
OK OK
OK OK
OK OK
OK OK
OK OK
OK OK
OK OK
OK OK
OK OK
OK OK
No-proto- No-proto-
col (TCP/ col (FINS)
UDP/RS- p. 198
232C)
p. 185
OK NA
OK NA
OK OK
OK OK
OK NA
OK OK
FQ2-S/CH User's Manual
for Communications Settings