Omron FQ2-S/CH Series User Manual page 306

*2 The information for the figure that is set as the model registration region or the measurement region is returned in the following manner for
each figure type.
Figure type of speci-
fied figure number
Line with width
Rectangle
Oval
Circle with width
Polygon
304
Command Control
Parameter Parame- Parame-
0 ter 1 ter 2
Figure type First X First Y
number coordinate coordinate
(4: Line with
width)
Figure type Rectangle Rectangle
number upper-left upper-left
(8: Rectangle) X coordi- Y coordi-
nate nate
Figure type Oval cen- Oval cen-
number ter point X ter point Y
(16: Oval) coordinate coordinate
Figure type Circle cen- Circle cen-
number ter point X ter point Y
(64: Circle with coordinate coordinate
width)
Figure type Number Vertex 1
number of verti- X coordi-
(512: polygon) ces nate
Response parameters
Parame- Parame- Parame-
ter 3 ter 4 ter 5
Second Second Line
X coordi- Y coordi- width
nate nate
Rectangle Rectangle
lower-right lower-right
X coordi- Y coordi- ---
nate nate
Oval X- Oval Y-
direction direction ---
radius radius
Circle Width
radius
---
Vertex 1 Vertex 2 Vertex 2
Y coordi- X coordi- Y coordi-
nate nate nate
... Parame- Parame-
ter 20 ter 21
...
--- ---
--- ---
--- ---
--- ---
Vertex Vertex
10 X 10 Y
coordi- coordi-
nate nate
FQ2-S/CH User's Manual
for Communications Settings