Omron FQ2-S/CH Series User Manual page 374

<Confirmation command response format>
When the Command Is Processed Normally
O K CR
Delimiter
When the Command Is Not Processed Normally
E R CR
Delimiter
<Execution command format>
Loads system data in binary data format.
S Y S L
<Execution command response format>
When the Command Is Processed Normally
O K CR
Delimiter
When the Command Is Not Processed Normally
E R CR
Delimiter
<Parameter Descriptions>
File size scheduled to be sent
System data (binary)
PREBKDLOADB (Check) / BKDLOADB (Execute)
Loading all setting data for the Sensor (binary data)
The Sensor loads all setting data (all scene data, system data, calibration group data) for the Sensor saved as
a backup file.
To execute this command, two types of commands are used, a confirmation command and an execution
command.
For how to execute the command using the confirmation command and the execution command, refer to
Binary Data File Load and Save Commands: p. 188.
372
Command Control
System data (binary)
O A D B
Space
(0x20)
Number of bytes of system data scheduled to be sent (integer type)
System data to be loaded (binary data)
CR
Delimiter
for Communications Settings
FQ2-S/CH User's Manual