Omron FQ2-S/CH Series User Manual page 188

Type of command
Commands to Write Data
Load setting data com-
mands
186
Control and Output in No-Protocol (TCP) / No-Protocol (UDP)
Command Abbreviation
SETITEMFIG-
PARAM SIFP
SETPOSFIG- SPFP
PARAM
SETDICFIG- SDFP
PARAM
ITEMDATA ID
ITEMDATA2 ID2
MODE None
OUTPUT- OTS
TRANSSTATE
PARAALLCOND PAC
PARAPORT- PPC
COND
POSITIONDATA PD
SYSDATA SD
SCNLOAD None
SGRLOAD None
SYSLOAD None
BKDLOAD None
Function
Changes the range set as the mea-
surement region or the model regis-
tration region for an inspection item.
Changes the range set as the mea-
surement region or the model regis-
tration region for an image adjustment
item (filter item/position compensation
item).
Sets the specified dictionary data cut-
out region parameters.
Sets parameters for the specified
inspection item.
Sets the text string data for the speci-
fied inspection item.
Sets the FQ2 execution status (exe-
cution mode).
Sets the output status (allowed/pro-
hibited) for the specified communica-
tions protocol.
Batch sets the ON/OFF status for the
all parallel I/O output terminals other
than the D terminals (D0 to D15).
Sets the input signal ON/OFF status
for the specified parallel I/O terminal.
Sets parameters for a position com-
pensation item or filter item.
Sets the value to the specified system
data.
Loads scene data that is stored on
the SD card inserted in the Touch
Finder.
Loads all scene data that is stored on
the SD card inserted in the Touch
Finder.
Loads system data that is stored on
the SD card inserted in the Touch
Finder.
Loads all setting data (all scene data,
system data, calibration group data)
for the Sensor saved as a backup file
from the SD card inserted in the
Touch Finder.
for Communications Settings
Reference
p.332
p.335
p.338
p.339
p.340
p.341
p.342
p.343
p.345
p.347
p.348
p.349
p.350
p.351
p.352
FQ2-S/CH User's Manual