Omron FQ2-S/CH Series User Manual page 412


Change Scene Number
This command changes the scene number to use.
Format
MRC SRC
(1 byte) (1 byte)
28 0F
Response Format
MRC SRC
(1 byte) (1 byte)
28 0F
End Codes
End code (hex)
0000
FFFF
Parameter Descriptions
Scene number
410
Command Control
Sensor command code (4
bytes)
00301000
MRES SRES
(1 byte) (1 byte)
End code
Command execution ended normally.
Command execution ended in an error.
Specifies the scene number (0 to 31) to change to.
Scene number (4 bytes)
Scene number to change to
(2 digits max.)
Sensor command code (4 bytes)
00301000
Meaning
FQ2-S/CH User's Manual
for Communications Settings