Omron FQ2-S/CH Series User Manual page 337

SETPOSFIGPARAM or SPFP
Set Measurement Region/Model Region for an Image Adjustment Item (Filter Item/Position Compensation
Item)
This command changes the range set as the measurement region or the model registration region for an image
adjustment item (filter item/position compensation item).
This command cannot set a new measurement region or model registration region.
When using this command, execute it for an inspection item that has already been set with a measurement
region or a model registration region.
<Command Format>
Command
S E T P O S F
or
Space Space
(0x20) (0x20)
S P F P
Command
Image adjustment item
(filter item/position
compensation item)
number (1 digit)
<Response Format>
When the Command Is Processed Normally
O K CR
Delimiter
When the Command Is Not Processed Normally
E R CR
Delimiter
FQ2-S/CH User's Manual
for Communications Settings
I G P A R A M
Figure
number
Space Space
(1 digit)
(0x20) (0x20)
Space Parameter 1 Parameter 21
(0x20)
Region Parameter 2
number
(1 digit)
Image adjustment item
(filter item/position
Parameter 1
compensation item) Space
number (1 digit) (0x20)
Space Space Figure
(0x20) (0x20) number
(1 digit)
Region
number
(1 digit)
...
CR
Delimiter
Parameter 21
Parameter 2
...
CR
Space Space Delimiter
(0x20) (0x20)
Command Control
335