Omron FQ2-S/CH Series User Manual page 158

Note
• The inspection results will be output according to the sorting method that is set for multi-point output for the
inspection item.
• In order to output multiple detection results of the inspection items that can be output their results simultaneously,
from the [Inspection] menu of the targeted inspection item, press [Multi-point output] and select [Yes].
Setting the Output Format
[In/Out] − [I/O setting] − [Output data setting] − [Link data output/Fieldbus data output]
1
Press [Output format].
2
Press [Output form].
3
Set either a floating point decimal or a fixed decimal for the output form.
Item
Output form Set the output form for numerical data.
Outputting Character Strings (Only supported on the FQ2-S4/CH)
You can set whether to output the character string that results from reading. Outputting the character string is
possible for the following inspection results.
• OCR
Reading and Verifying Character Strings in FQ2-S/CH Series User's Manual (Cat. No. Z337)
• Bar code
Reading Bar Codes in FQ2-S/CH Series User's Manual (Cat. No. Z337)
• 2D-code
Reading 2D-codes in FQ2-S/CH Series User's Manual (Cat. No. Z337)
• 2D-code (DPM)
Reading 2D codes (DPM) in FQ2-S/CH Series User's Manual (Cat. No. Z337)
The procedure for outputting the character string is given here with PROFINET communications.
[In/Out] − [I/O setting] − [Output data setting] − [Link data output/Fieldbus data output] −
[Output data set]
1
Select the inspection item for which to output the character string.
2
Set the following items on the setting display.
Parameter
String output ON/OFF
Partial output ON/OFF
Output string setup
156
Outputting Data and Controlling Operation through PROFINET
Description
Setting
OFF (default)
Yes
No (default)
Yes
1 to 128 for OCR
1 to 1024 for Bar code, 2D-
code, or 2D-code (DPM)
Setting range
Floating point or fixed point (default: Fixed
point)
Description
Sets whether to output the character string that results
from reading.
Sets whether to specify the range of characters to output.
Sets the output range.
FQ2-S/CH User's Manual
for Communications Settings