Omron FQ2-S/CH Series User Manual page 421


Get the Inspection Item Data
This command acquires the parameters and measurement values of the specified inspection item.
Format
MRC SRC Sensor command code (4
(1 byte) (1 byte) bytes)
28 0F 00401020
Response Format
MRC SRC MRES
(1 byte) (1 byte) (1 byte)
28 0F End code
End Codes
End code (hex)
0000 Command execution ended normally.
FFFF Command execution ended in an error.
Parameter Descriptions
Inspection item number Specifies the number of the inspection item for which to acquire the data. (0 to 31)
External reference num- Specifies the external reference number.
ber Section 9-2 External Reference Parameters
in Sensor FQ2-S/CH Series User's Manual (Cat. No. Z337)
Acquired value Returns the data for the specified inspection item.
Section 9-2 External Reference Parameters
in Sensor FQ2-S/CH Series User's Manual (Cat. No. Z337)
FQ2-S/CH User's Manual
for Communications Settings
Inspection item number (4 bytes) External reference
Inspection item number (2 digits
max.)
SRES Sensor command code
(1 byte) (4 bytes)
00401020
Description
number (4 bytes)
External reference
number
Acquired value
(4 bytes)
Acquired value
(1,000 times the
actual value)
Command Control
419