Omron FQ2-S/CH Series User Manual page 383

When the Command Is Not Processed Normally
E R CR
Delimiter
<Execution command format>
This command outputs all scene data in binary data format.
S G R S A V
<Execution command response format>
When the Command Is Processed Normally
All scene data (binary)
O K CR
Delimiter
When the Command Is Not Processed Normally
E R CR
Delimiter
<Parameter Descriptions>
All scene data size
All scene data (binary)
PRESYSSAVEB (Check) / SYSSAVEB (Execute)
Outputting system data (binary data)
This command outputs system data for the Sensor in binary data format.
To execute this command, two types of commands are used, a confirmation command and an execution
command.
For how to execute the command using the confirmation command and the execution command, refer to
Binary Data File Load and Save Commands: p. 188.
<Confirmation command format>
Before system data in binary data format is output, a check is performed to determine if the data can be
received by the external device that will receive the data.
P R E S Y S
FQ2-S/CH User's Manual
for Communications Settings
E B CR
Delimiter
CR
Delimiter
Number of bytes of all scene data to output (integer type)
All scene data to output (binary data)
S A V E B CR
Delimiter
381
Command Control