Omron FQ2-S/CH Series User Manual page 194

Type of command
Save commands for
binary data files
192
Control and Output in No-Protocol (TCP) / No-Protocol (UDP)
Command Abbreviation
PREIMAGESAVEB
IMAGESAVEB
PREALLIMAGESAVEB
ALLIMAGESAVEB
PRECLBSAVEB
CLBSAVEB
PRECGRSAVEB
CGRSAVEB
PREDICSAVEB
DICSAVEB
PREDGRSAVEB
DGRSAVEB
Before images saved to the Sensor's mem-
ory are output in binary data format, a check
None is performed to determine if the data can be
received by the external device that will
receive the data.
None Outputs image data stored in the Sensor
memory in binary format.
Before all images saved to the Sensor's
memory are output in binary data format, a
None check is performed to determine if the data
can be received by the external device that
will receive the data.
None Outputs all image data stored in the Sensor
memory in binary format.
Before calibration data in binary data format
is output, a check is performed to determine
None if the data can be received by the external
device that will receive the data.
None This command outputs the calibration data in
binary data format.
Before all calibration data in binary data for-
mat is output, a check is performed to deter-
None mine if the data can be received by the
external device that will receive the data.
None This command outputs the all calibration
data in binary data format.
Before model dictionary data is output in
binary data format, a check is performed to
None determine if the data can be received by the
external device that will receive the data.
None This command outputs model dictionary data
in binary data format.
Before all model dictionary data is output in
binary data format, a check is performed to
None determine if the data can be received by the
external device that will receive the data.
None This command outputs all model dictionary
data in binary data format.
Function Reference
FQ2-S/CH User's Manual
for Communications Settings
p.384
p.384
p.385
p.385
p.386
p.386
p.388
p.388
p.389
p.389
p.390
p.390